1200cc/1500/ 1600cc Single Port Refurbished Long Block.Stock

Part no. 250902021

1200cc/1500/ 1600cc Single Port Refurbished Long Block.Stock

Check webpage menu for prices

£1,799.00plus VAT

No stock counts are shown — availability changes daily, so one of our team will confirm stock, fitting and the best price for your build.

View basket

Lead times shown on home pageRefurbished Single Port Long Block(£700 added to price at basket refunded on receipt of suitable core engine

See **Return engine section at bottom)Items with ** have upgrade options to select.(More info on these below)Cylinder Heads Refurbished **CAMSHAFT AND LIFTERS **BALANCEDCRANK: Genuine VW reground as required & Dynamically Balanced. (who else builds refurb engines like this?)NEW Spark plugs

NEW Steel Pushrod tubes. **NEW Pistons & Ring pack

NEW Barrels

NEW or refurbished Rocker covers.** NEW MAIN BEARINGS. NEW BIG ENDS. NEW CAM BEARINGS. NEW FLYWHEEL 200mm 12v

NEW Elring silicone Flywheel oil seal

NEW Elring Gasket set

Rocker Set Refurbished **CASE: Align bored as required. with or without bus mounts (Chemical cleaned inside/out and then painted Silver or black) **CONRODS: VW forged conrods checked and new bushes as required

NEW OR REFURBISHED FLYWHEEL: Supplied with a 4 dowel 200mm 12v Stock weight flywheel (Please say if you need to keep your 180mm) ** End float set to correct specification

Supplied with remaining gasket set for fitting your ancillaries

Looking for a TURN KEY based on a refurbished engine, Ready to bolt into your vehicle!Turn Key optionsSINGLE CARB:Single Carb and manifold

New tinware, Alternator

Kit with Stand, Fan kit, Mechanical Fuel Pump, Codan R9 Fuel Lines, New Distributor/Leads/Coil, Plugs, Empi exhaust and j tubes (Steel) Crankshaft & Alternator Pulley (Steel)TWIN CARB:Twin 34 Carbs and manifold

New tinware, Alternator

Kit with Stand, Fan kit, Mechanical Fuel Pump, Codan R9 Fuel Lines, New Distributor/Leads/Coil, Plugs, Empi exhaust and j tubes (Steel) Crankshaft & Alternator Pulley (Steel)**Return engine should be un seized and the core components re-usable after moderate machine work. (Core parts are crankcase, crank, rods, rockers, heads

If these are damaged an agreement can be made on cost of sourcing replacement)